Usaveappliancescs Logo
Group of home appliances isolated on white background

Maytag washer wont turn on

Maytag washer wont turn on. Maytag washers are known for their high-quality performance and reliability. However, if you’ve found that your Maytag washer won’t turn on, it can be a frustrating and concerning experience.

A washer that won’t turn on can be caused by various issues, such as a tripped circuit breaker, a faulty power cord, or a malfunctioning control board.

It’s essential to take immediate action to investigate the root cause of the problem and resolve it to prevent any further damage or inconvenience. By understanding some common causes of a Maytag washer not turning on, you can quickly troubleshoot the issue and get your appliance up and running again.

Maytag washer wont turn on

maytag washer wont turn on 2022 troubleshooting

You don’t need to worry any longer; diagnose the problem, which is not allowing the washer to turn on, and then follow the below-mentioned methods for best results.

Troubleshoot and Diagnose

There can be different reasons why your Maytag washer isn’t starting anyway. This is a very common problem, so don’t panic.

We have gathered the possible reasons why your washer isn’t starting over along with a solution for those problems, so let’s have a read and discover the root cause your washer won’t start or turn on.

Power Trouble

Before running to a professional, check if your Maytag washer is getting a power supply; this is the most common complaint washing machine owners face, yet the solution is in the home.

  • Check if the power is getting to your Maytag washing machine or not; there are a few ways to check that.
  • Even if you have plugged in the washer switch, but still the washer isn’t getting the power, what you can do is check the power outlet.
  • How you can do this is to connect another appliance and see if the outlet is still providing the power or not. If you’re still unsure about the outlet, use a multimeter to test it.
  • If not a multimeter, another appliance is your best help to test the lamp; it can be a cellphone or lamp or anything.

After connecting the appliance and the power is not reaching that second appliance, it is clear that the outlet is faulty and you need to replace it.

That faulty outlet can be a reason your Maytag washer won’t turn on. After all, if your washer is not starting, it’s time to do a hard reset, and how you can do a reset is an easy task. Follow the below steps.

  1. Unplug the machine appliance.
  2. For five seconds, press the power or start button.
  3. Hold the pause button for another five seconds.
  4. Finally, press the power to restart after plugging in the machine.

If your start button is stuck, we know the solution just around the areas of your machine start button, put a light pressure that will help your stuck button to function normally.

Inaccurate Washer Setting

There is always an instruction guide to help you correctly set the machine; however, if you skipped that or set the features wrongly, then don’t worry; we will tell you how to set your machine. Activating the wrong features can cause your machine not to start over.

You might activate the delay in starting the machine, or maybe the washer door is not closed, or probably your wash load setting is not correctly set.

You can change the settings by pressing the “Adjust Cycle” button on the main menu display screen.

Command Lock is Turned ON

command lock is turned on

Maytag washers have various unique features, and this Command or control lock is one of them. Its function is to seal or jam the features to ward off an adventurous start.

You might have activated it by holding the start or power off button for more than three seconds, and that’s why your machine is not starting.

You can deactivate this by having the start button for more than three seconds; if the power or start button is not deactivating the control button, press the “Delay” or “Extra Rinse” for ten seconds” button.

Defective Control Board

Control boards in Maytag washers are also known as display boards, and it has lighted buttons for different functions such as drying or washing related.

It is located at the top of the washer and beside the panel. If you press any button that does not respond, the board is defective.

You can do this by using a multimeter; if you see no continuity towards the wires and find that the cables are burned, then it the time for you to install a new control board.

Busted Timer

Timers in Maytag washers are to handle the timing functions of the machine, such as spinning or washing. Also, it monitors the water level as it repeatedly adds water to the tub and compensates for the lost water.

These timers have various gears and springs; if any of the springs or equipment is broken, the washer won’t turn on. For a timer to be repaired, you need a professional as only an eligible person can help you because it is a time-consuming task.

Bottom Line

A Maytag washer that won’t turn on can be a frustrating experience that can disrupt your daily routine. There are several potential causes for this issue, including a tripped circuit breaker, a faulty power cord, or a malfunctioning control board. To resolve the issue, it’s essential to take immediate action and troubleshoot the problem. With prompt action and proper maintenance, you can keep your Maytag washer running smoothly, providing efficient and effective cleaning for your laundry needs.

Leave a Reply