Samsung washer wont spin. When it comes to doing laundry, a washing machine that won’t spin can be a frustrating and time-consuming problem. Samsung washers are known for their reliability and advanced features, but even the best machines can develop issues over time.
If you’re facing the issue of your Samsung washer not spinning, you’re not alone. There are a number of possible reasons why your washer is refusing to spin, and identifying the root cause is key to getting your machine back up and running.
We’ll explore some of the common causes of Samsung washers not spinning and provide some tips on how to troubleshoot and resolve the issue.
Samsung washer wont spin
You need to follow the following steps to repair your Samsung washer that is not spinning.
Step 1: Unplug the washer
The first step is to unplug the washer as it is an electrical appliance and works with electricity, so the first thing is to unplug it.
Doing any work while electricity is on can be dangerous to you. Flip the circuit breaker to the washer and unplug it from all the power supplies.
If you are using a dryer or washer that works with gas instead of electricity, then you need to turn off the gas supply of the washer.
Step 2: Remove the top panel
The next step is to start disassembling the Samsung washer. To do this, you have to remove the clips. To do this process, you need the help of a screwdriver.
Using a screwdriver will do your work in very less time. Make sure to remove the clips that run down the door seal.
This way, you can easily access the front panel of the washer and detach it to move further. Remove the top panel or the front panel from the washer.
Step 3: Disconnect the wire
After removing the clips and the front panel, the next step is disconnecting the wire connector from the gasket or the door seal. Push the tab while removing the wire connector.
You can easily disconnect the wire with the help of this. After this, you need to remove the control panel of the washer.
Do this process carefully and cautiously remove the control panel to access the inside of the machine. Once you have the excess to the inside, you can easily inspect what is wrong with your washer that is causing it not to spin.
Step 4: Inspect the Drive belt
After removing the front and the control panel, the next is to inspect what is wrong with the washer that is causing it not to spin.
Most of the time, it is the drive belt that is broken, and that causes the washer not to spin properly. Check; if the belt is broken, then remove the broken drive belt and place a new one in place of it.
Step 5: Inspect the Drum bearing
Another reason your Samsung washer is not spinning properly can be due to the broken drum of the washer.
Due to this broken or damaged drum, the normal functioning of the washer is disturbed.
If the drum bearing is worn out, then this can cause the washer not to spin. Most of the time, it starts making a squeaking sound.
Step 6: Reassemble the washer
Now, the final and last step is to reassemble the washer. Put the clamps back in the washer and properly reassemble the washer.
Ensure you put the control and front panel properly in the washer. Use about six screws to put the front panel back and reassemble the dishwasher door.
In this way, you can easily see what’s wrong with the Samsung washer causing it not to spin properly.
Samsung washer that won’t spin can be a frustrating problem, but it’s not necessarily a sign of a major issue. By taking a methodical approach to troubleshooting and identifying the root cause of the problem, you can often resolve the issue without needing to call in a repair technician. Whether the problem is due to a faulty motor, a broken belt, or an issue with the control board, there are steps you can take to get your washer back up and running. By following the tips and advice provided in this article, you can take the first steps toward resolving the issue and getting back to the business of clean laundry.