Electrolux washer wont turn on. The Electrolux washer is one of the most useful kitchen appliances. They are used in almost every household by everyone.
When it comes to washing, Electrolux washes are surely the best choice for everyone. If due to unknown reasons the Electrolux washer is not working properly and is not turning on properly even if you have tried many times or it is having some other issues.
Then there must be a mechanical or some other problem in it. In this situation, you don’t need to get worried as it can be easily solved on your own without help from a professional.
In this article, you will learn how you can easily turn on your Electrolux washer that is not turning on by itself and is causing inconvenience.
After reading this article, you will be able to know about the ways that can help you to get rid of the problems associated with your Electrolux washer.
Electrolux washer wont turn ON
You need to follow the following steps to turn on your Electrolux washer that is taking the time or is not turning on.
Step 1: Unplug your washer
The first and the most important step while inspecting your Electrolux washer is to unplug the washer.
An Electrolux washer is an electrical appliance and works with electricity, so the first thing is to unplug it, as not plugging it off can be fatal.
Also, performing any kind of work while electricity is on can be dangerous to you. Flip the circuit breaker to the washer and unplug it from all the power supplies.
Make sure that your washer is not connected to the power supply.
Step 2: Remove the clamps
The next step is to remove the clamps and clips of the washer. For this, you have to unthread the screws of the washer.
To do this process, you need to take help from a screwdriver. Using a screwdriver will do your work in very less time. Also, remove the clamps that run down the door seal.
Step 3: Remove the control panel
In this step, you need to access the front panel of the washer and then detach it to move further.
After removing the clamps and the front panel, the next step is disconnecting the wire connector from the gasket or the door seal.
Also, push the tab while removing the wire connector. In this way, the wire is disconnected. After this, you need to remove the control panel of the washer.
Do this process carefully and cautiously remove the control panel to access the inside of the machine.
Step 4: Uninstall the vibration dampener
The next step after removing the front and the control panel is to locate the vibration dampener and remove it. This vibration dampener is located at the top of the washer.
Unthread the screws of the washer and lift the component; once you’ve got the access, remove the vibration dampener.
Step 5: Remove and install the new motor control board
The next step is to reach the motor control board by disconnecting the wires. Make sure to remember the alignment of the cables when you are removing the motor control board.
Now, remove the motor control board and then install the brand new motor control board to get your problem solved.
Step 6: Reassemble the washer
Now, the last and final step is to reassemble the washer. Put the clamps back in the washer and properly reassemble the washer.
Ensure you are putting the control and front panel properly in the washer, as not placing it properly can alter the normal functioning of the washer.
Use about six screws to put the front panel back and reassemble the dishwasher door; after reassembling the dishwasher, plug it in and try to on it.
This way, you can easily repair the washer that is not turning on.
Conclusion
To conclude, the Electrolux washer is the basic need of today. It helps to perform your work in a very less time. It is very beneficial and used by every household. If due, for any reason, your Electrolux washer is not turning on, you can turn it on by following these simple and easy steps.
Related Guides