Usaveappliancescs Logo
Group of home appliances isolated on white background

Faucet makes noise when hot water is turned on

Faucet makes noise when hot water is turned on. Faucets are a vital element of any plumbing system, and they are used on a daily basis in every household.

Nevertheless, sometimes a faucet may cause a problem, such as making noise when the hot water is turned on.

This can be a frustrating and annoying issue, as the noise can be quite loud and disruptive. Understanding the causes of faucet noise can help you identify and fix the problem.

Faucet makes noise when hot water is turned on

Faucet makes noise when hot water is turned on 2023

The following are the reasons due to which your Faucet makes noise when hot water is turned on

Reason 1: Mineral buildup

One of the most common reasons for a faucet to make noise when hot water is turned on is mineral buildup.

As water flows through your pipes, it can leave behind mineral deposits such as calcium and magnesium.

These accumulations can amass over time, creating a buildup that can constrain water flow and cause the faucet to make noise.

Solution to this Problem

To fix this issue, the mineral buildup can be removed by using a de-scaling solution, vinegar, or a specialized cleaning solution for mineral buildup in your faucet.

Reason 2: Problem with the valve seat

Another reason for a faucet to make noise when hot water is turned on is a problem with the valve seat. The valve seat is a small ring situated in the faucet that monitors the flow of water.

If the valve seat becomes frayed or damaged, it can cause water to flow haphazardly, creating a beating or banging noise.

Solution to this Problem

To solve this issue, make sure to turn off the water supply to the faucet by turning the valves under the sink clockwise.

  1. Use a screwdriver to cut off the handle from the faucet. This will reveal the valve stem and the valve seat. Look for any debris or mineral buildup on the valve seat. If there is any debris, clean it off with a brush or a piece of steel wool.
  2. Examine the valve seat for any fissures or chips. If the valve seat is broken, it will need to be changed. If the valve seat is damaged and needs to be replaced, you will need to remove the stem by using a stem wrench.
  3. Carefully remove the damaged valve seat and replace it with a new one that is the same size and type. Reinstall the lever and turn the water supply back on.

Reason 3: Problem with the washer

Problem with the faucet washer

A third reason for a faucet to make noise when hot water is turned on is a problem with the washer.

The washer is a small rubber or plastic component that is located inside the faucet and is responsible for controlling the flow of water.

If the washer is worn, damaged, or not properly installed, it can cause the faucet to make noise.

Solution to this Problem

This can be fixed by replacing the washer or the whole cartridge that contains the washer in some cases.

Reason 4: Issues with the pipes or the water pressure

Another reason for faucet noise when hot water is turned on is a problem with the pipes or the water pressure. If the water pressure is too high, it can cause a banging or rattling noise in the pipes.

This can be solved by installing a pressure reducing valve. On the other hand, if the pipes are not properly secured or insulated, they can cause noise as the water flows through them.

Solution to this Problem

This can be fixed by properly securing and insulating the pipes. Make sure the shut-off valves under the sink are fully open.

If they are partially closed, it can cause low water pressure. Also, check the aerator on the faucet for any clogs or debris. Clean or replace the aerator if necessary.

As well see the pipes under the sink for any clogs or blockages. Check for any leaks in the pipes under the sink. Leaks can cause a drop in water pressure.

Use a water pressure gauge to check the water pressure coming into your home. If the pressure is low, contact your local water supplier to inquire about the problem.

Last but not least, now, and then a faucet can make noise when hot water is turned on because of a problem with the water heater.

If the water heater is not functioning properly, the water may be too hot and may cause the pipes to expand, creating a banging or rattling noise. This issue can be resolved by servicing or replacing the water heater.

Conclusion

In conclusion, a faucet making noise when hot water is turned on can be caused by several issues, including mineral buildup, difficulties with the valve seat, washer, pipes or water pressure and water heater. Some of these issues can be fixed by performing a straightforward cleaning or replacing a component.

To prevent faucet noise, it is important to have your faucets serviced on a regular basis and to be aware of the signs of a problem. If you notice your faucet making noise, it is necessary to identify the cause and take steps to fix it as soon as possible to avoid further damage or inconvenience. Recognizing and determining the cause of faucet noise can help in maintaining a functional and quiet plumbing system.

Leave a Reply