Garbage disposal reset button keeps popping out. Garbage disposal is a device mounted underneath a kitchen sink that crushes up food waste and leads it down the drain.
It is usually driven by electricity and linked to the home’s plumbing system. Garbage disposals are a convenient way to dispose of food waste, reducing the need for garbage bags and restricting the amount of food waste that ends up in landfills.
A garbage disposal reset button is a security feature that is constructed to shut off the power to the disposal unit if a mess or overload happens.
The button is typically positioned on the bottom or side of the disposal unit and can be easily reset by pushing it back in. However, if the reset button keeps popping out, it could indicate a problem with the disposal unit that needs to be tackled.
Garbage disposal reset button keeps popping out
The following are the reasons due to which your garbage disposal reset button keeps popping out.
Reason 1: Jammed Disposal
One of the most common reasons for a reset button to keep popping out is a jammed disposal. Food particles and other debris can build up in the disposal, causing it to become jammed and unable to function properly.
Solution to this problem
To fix a jammed disposal, you will need to turn off the power to the unit by unplugging it or turning off the circuit breaker.
Then, use a long-handled tool such as a broom handle or pliers to by hand rotate the flywheel in the interior of the disposal. If you are unable to free the jam, it may be essential to get rid of the disposal unit and clean it out by hand.
Reason 2: Damaged impeller
Another common cause of a reset button that keeps popping out is a worn or damaged impeller. The impeller is a rotor located inside the disposal that grinds food particles and sends them down the drain.
If the impeller is worn or smashed, it may not be able to grind food properly, causing the disposal to become overloaded and the reset button to pop out.
Common signs of a damaged impeller comprise of a grinding noise getting from the unit, a burning smell, or a malfunction to grind food properly.
Solution to this problem
Before you begin, make sure the disposal is unplugged or the circuit breaker is turned off to avoid any electrical hazards.
To gain access to the impeller, you will need to remove the garbage disposal unit from the sink. First, disconnect the drainpipes and then use a screwdriver to eliminate the framing assembly that holds the disposal in point.
Once the disposal unit is withdrawn, you can examine the impeller for signs of damage such as cracks or worn blades. If the impeller is broken, it will need to be replaced.
You can purchase a replacement impeller from the company or a third-party supplier. Make sure to get the one that is consistent with your disposal unit model.
After replacing the impeller, reinstall the disposal unit by reversing the steps you used to remove it. Make sure to tighten all the screws and reconnect the drainpipes. Ultimately, turn the power back on and run the disposal to test if it works appropriately.
Reason 3: Damaged motor
Another cause of a reset button that keeps popping out could be a damaged or worn-out motor.
The motor is what powers the impeller and if it is damaged or worn out, the disposal may not function properly, causing the reset button to pop out. In this case, the motor will need to be replaced.
Solution to this problem
Before you begin, make sure the disposal is unplugged or the circuit breaker is turned off to avoid any electrical hazards.
To access the motor, you will need to remove the disposal unit from the sink. First, disconnect the drainpipes and then use a screwdriver to remove the mounting assembly that holds the disposal in place.
Once the disposal unit is removed, you can inspect the motor for signs of damage such as burn marks, cracked housing, or frayed wires.
If the motor is damaged, it will need to be replaced. Make sure to get the one that is compatible with your disposal unit model.
After replacing the motor, reinstall the disposal unit by reversing the steps you used to get rid of it. Make sure to tighten all the screws and reconnect the drainpipes. Finally, turn the power back on and run the disposal to test if it works properly.
It is important to note that if your reset button keeps popping out, it could be a sign of a serious problem with your disposal unit that could lead to damage or even a fire. Therefore, it is important to deal with the problem as soon as feasible.
Final Thoughts
In summary, a garbage disposal reset button that keeps popping out could be a symptom of a problem with the disposal unit that needs to be tackled. The most widespread causes of this problem are jammed disposals, worn or damaged impellers, and damaged or worn-out motors. If you find that your reset button keeps popping out, it is important to turn off the power to the unit, try to by hand rotate the flywheel to free any jammed food particles, and inspect the unit for damage or wear.
