Honeywell thermostat wont turn off. Are you having trouble with your Honeywell thermostat fan? It’s one of those things that are not quite as simple as it seems.
Some thermostats will allow you to turn your heating or air conditioning on and off remotely, some thermostats will tell you when it’s time to change your filter, and then some thermostats will say to you when your air conditioner or heater needs to be replaced.
It may seem that these thermostats should all work the same, but they don’t. Some thermostats have a built-in thermostat sensor that sends signals to the furnace or air conditioner when the temperature rises or falls. In contrast, others require a manual button push to start the heating or cooling process.
Honeywell Thermostat Wont Turn Off
If your Honeywell thermostat fan isn’t working, then this blog post will walk you through some troubleshooting steps to see if you can find the problem and fix it.
Reset the Honeywell thermostat
If you’re having trouble resetting your Honeywell thermostat fan, you can try a few things. First, make sure you’ve removed the battery from the device. If you can’t find the battery, you may have to take it to your local Honeywell dealer.
Next, remove the thermostat cover. You’ll find the cover on the bottom of the thermostat.
Once the cover is removed, you can test the fan by pushing it up and down. If the fan doesn’t move, you can check the wiring for continuity. You may need to replace the wires.
If you can’t figure out the problem, you may need to call your Honeywell dealer.
Check if the thermostat is connected to the wall
If you’re experiencing problems with your Honeywell thermostat fan, then the first thing you should do is to make sure that the thermostat is connected to the wall.
This is very important because if the thermostat is not connected, then the fan will not operate. To confirm that the thermostat is plugged into the wall, look at the back of the unit.
You’re good if it has a round hole with a wire coming out of it. If not, you’ll need to follow the next steps to see if you can find and repair the problem.
Check if there is a power outage
The most common cause of thermostat fan problems is a power outage. If you cannot get to the thermostat and check it, try turning on a different power outlet in the room.
It could be that a breaker has tripped and the thermostat is no longer receiving power. If the thermostat fan is not running, something may be stuck inside the thermostat. If you unplug the unit from the wall for 5 minutes, plug it.
The fan should start right away if the problem is a loose connection. If the fan does not start after unplugging or is still not running after plugging the unit back in, you will need to have it serviced.
The thermostat will probably be able to tell you what is wrong with the fan. You can ask an electrician to tell you what you need to do to fix the problem.
Reinstall the thermostat
If you’ve tried to troubleshoot the thermostat by unplugging and plugging the fan into different outlets, and the fan still doesn’t work, then it may be time to replace it.
You’ll need to take apart your thermostat and look at how it works. You will need to call a professional to come out and install your new thermostat.
If the fan still doesn’t turn off, replace the switch
If you’ve already replaced the thermostat and still can’t figure out why your fan won’t turn off, it’s probably time to replace the switch.
When you’re replacing the switch, make sure that you’re replacing the switch from the furnace and swapping out the old one with a new one.
It’s also important to note that you can use a different switch brand, so don’t worry if you’re using another brand from your original switch.
This is important because the thermostat controls the fan motor, and if you’re using a switch other than the furnace’s, you could be running into problems.