Kenmore dishwasher leaking from bottom. Kenmore dishwashers are known for their efficiency and reliability in cleaning dishes. However, one issue that some users may experience is a leak from the bottom of the dishwasher.
This problem can cause water damage to the surrounding area and may lead to mold growth and other potential hazards. If you’re facing this issue with your Kenmore dishwasher, it’s essential to take immediate action to prevent further damage and resolve the problem.
We’ll explore the possible reasons why your Kenmore dishwasher is leaking from the bottom and offer some solutions to fix the problem.
Kenmore dishwasher leaking from bottom
This article will explain why your dishwasher is not working or leaking from the inside. After reading this article, you can fix any leakage in your dishwasher.
The following are the reasons why your dishwasher is leaking from the inside.
Wrong type of detergent
One of the main reasons your dishwasher is not working properly and leaking from the bottom is the wrong type of detergent used in the dishwasher.
Detergents come in different types. Some detergents have harsh chemicals in them. These chemicals also cause leaks in the dishwasher. Due to these leaks, the dishwasher starts leaking water from the bottom.
Solution to this problem
To eliminate this problem, use the detergent that best suits the dishwasher. Don’t use harsh chemicals that can cause cracks and leaks in the dishwasher.
Excess amount of dishes
If you put too many dishes in the dishwasher, this can also result in the abnormal functioning of the dishwasher. The Kenmore dishwasher has a specific limit for the dishes.
If this limit exceeds this, the dishwasher might get cracked, and the water starts leaking from the bottom. The limit of this Kenmore dishwasher is up to 12 place settings.
Due to excess dishes, the dishwasher cannot bear this load, and the dishes are also not cleaned properly. Due to this thee dishwasher get cracks and leaks.
Solution to this problem
To avoid this problem related to the dishwasher, you need to put an equal amount of dishes in the dishwasher to prevent cracks or leaks.
Dishwasher is unlevel
Another reason your Kenmore dishwasher is leaking can be due to the unlevel of the dishwasher. The Kenmore dishwasher is a special kind of dishwasher that needs to be levelled specifically.
If this Kenmore dishwasher is not balanced properly, this can cause problems and inconvenience in the dishwasher.
The Kenmore dishwasher that is not even can cause damage and leaks in the dishwasher. Due to this leak in the dishwasher, you can notice pools of water under the dishwasher.
Solution to this problem
To solve this problem, level the dishwasher properly and place it at a specific level so it would not leak.
Pump seal is loose
Another common reason why your dishwasher is not working properly can be due to the loose pump seal.
Due to this loose seal, the water starts to leak, and as a result, a huge amount of water starts collecting in the dishwasher. Due to this leak, the water also starts dripping from the motor.
Solution to this problem
This problem can be solved by removing the motor panel and replacing its rubber seal with a new one that is not damaged.
Water inlet valve is damaged
One of the common reasons your Kenmore dishwasher is not working can be due to the damaged water inlet valve. This also causes inconvenience to you.
Any mechanical fault in the water inlet valve can cause the water to leak from the bottom. As a result, you can face difficulties.
Solution to this problem
Here are the steps to replace a dishwasher water inlet valve:
- Turn off the power supply: Before starting any repair work, unplug the dishwasher from the power source to ensure your safety.
- Turn off the water supply: Turn off the water supply valve located under the sink.
- Remove the access panel: Remove the lower access panel from the front of the dishwasher using a screwdriver.
- Disconnect the water supply line: Use pliers to loosen the nut connecting the water supply line to the inlet valve.
- Disconnect the wiring: Carefully disconnect the wiring connected to the inlet valve. Take a picture or make note of the wiring connections to ensure you can reconnect them correctly later.
- Remove the valve: Use a screwdriver to remove the screws holding the valve in place.
- Install the new valve: Place the new valve in the same position as the old one and secure it with screws.
- Reconnect the wiring: Reconnect the wiring to the new valve, making sure to match the connections with the picture or notes you took earlier.
- Reconnect the water supply line: Use pliers to tighten the nut connecting the water supply line to the inlet valve.
- Reinstall the access panel: Put the lower access panel back in place and secure it with screws.
- Turn on the water supply: Turn on the water supply valve under the sink.
- Restore power: Plug the dishwasher back in and turn on the power supply.
- Test the inlet valve: Run a cycle to ensure the new inlet valve is functioning properly.
Gasket is damaged
One of the most common reasons that your dishwasher is leaking water from the bottom can be due to broken or damaged gaskets.
This is the main reason the dishwasher starts leaking. Most of the time, this latch or gasket is broken, due to which the dishwasher can start leaking.
Solution to this problem
You need to get this gasket or door latch repaired to solve this problem. If not repaired, try to replace it as soon as possible to avoid this problem.
Conclusion
A Kenmore dishwasher leaking from the bottom can be a frustrating and potentially dangerous problem. Ignoring the issue can lead to further damage and hazards such as water damage, mold growth, and potential electrical hazards. We’ve discussed some of the possible reasons why your Kenmore dishwasher may be leaking from the bottom and provided some solutions to fix the problem.
