Kenmore dryer not heating up. Kenmore dryer is a wide home appliance that uses electricity and has many uses.
It has multiple functions, such as removing moisture from a load of clothes. Kenmore dryers are used to dry the clothes that are washed and wet.
Due to many unknown reasons, the Kenmore dryers can stop working and don’t produce enough heat. This can be due to some technical issues in your Kenmore dryer. Now, you can easily solve this issue yourself without taking any from a professional.
Kenmore dryer not heating up
There can be many reasons your Kenmore dryer is not heating up and creating trouble for you.
The following are the reasons why your Kenmore dryer is not heating up.
Malfunctioning of the Ignitor
One of the main reasons your Kenmore dryer is not working and is not heating up is due to the ignitor’s malfunction.
The ignitor has a coil that glows up and turns orange as it is heated. At a specific and appropriate temperature, it is sensed by the sensor.
But sometimes, the coil of the ignitor burns out. Due to this, your Kenmore dryer will be unable to produce a specific amount of heat that is needed and will not heat up.
Solution to this problem
This problem can be easily solved by repairing the malfunctioning ignitor with a new and fully functional one.
Flame sensor is damaged
Another reason for the Kenmore dryer not working can be the malfunctioning of the flame sensor.
The flame sensor is present in the burner and has its own specific functions. The function of this is to sense the heat produced by the ignitor.
Most of the time, this flame sensor is not working, due to which you can face difficulty in using your Kenmore dryer, and your dryer may not produce heat properly.
Solution to this problem
To solve this issue, you need to replace this flame sensor with a new one, and the problem of your Kenmore dryer not heating up properly can be easily solved. Here’s how:
Note: Before attempting any repair, make sure to disconnect the dryer from the power source.
- Locate the flame sensor. The flame sensor is usually located on the burner assembly of the dryer. Refer to your Kenmore dryer’s manual for the specific location.
- Remove the wire harness connected to the flame sensor. The flame sensor is connected to a wire harness. Gently pull the wire harness away from the sensor to disconnect it.
- Remove the flame sensor. The flame sensor is typically held in place by one or two screws. Use a screwdriver to remove the screws, and then remove the flame sensor from the burner assembly.
- Install the new flame sensor. Place the new flame sensor onto the burner assembly and secure it with the screws.
- Reconnect the wire harness. Reconnect the wire harness to the new flame sensor.
- Test the dryer. Reconnect the power source and turn on the dryer to test if the flame sensor replacement has resolved the issue.
Note: If the issue persists, it may be a sign of a more serious problem. It’s best to consult a professional for further assistance or consider getting a new dryer.
Problems in the Venting system
Another reason your Kenmore dryer is not working and is not heating up properly can be due to problems in the airflow or the venting system of the Kenmore dryer.
If you are facing such a situation, you need to check properly whether there is an issue in the airflow or not. Issues in airflow can be easily checked by checking your dryer’s venting system.
Solution to this problem
To solve this issue, properly check the venting system and inspect what is wrong with the airflow. This problem can easily be solved by examining the airflow, and you can get rid of your Kenmore dryer not heating up.
Thermal fuse is not functional
Kenmore dryers also have a thermal fuse in them. These are the safety switches of the Kenmore dryers.
The thermal fuse in any Kenmore dryer is one of its prime features as it plays an important role in its normal functioning.
The thermal fuse of a Kenmore dryer is its advanced feature. The main purpose of this thermal fuse is to prevent the dryer from becoming too hot.
Solution to this problem
To solve this problem, you need to replace this thermal fuse, open the dryer, and go to the thermal fuse part.
After you have located the thermal fuse, you can easily fix it. Then by losing the screws, you can install a new thermal fuse in your Kenmore dryer.
Control board is damaged
Sometimes, the control board of the Kenmore dryer is not working. The control board is like the brain of the dryer.
It controls all the activities of the Kenmore dryer. It gives specific functions to the dryer to perform the process properly.
Most of the time, the Kenmore gas dryer is not working, fails to produce the specific amount of heat, and stops heating up.
Solution to this problem
This problem can be solved by replacing the control panel of the Kenmore dryer with a new one.
If the control panel cannot be repaired, you need to replace it with a new one that works more effectively and effectively and gives better results. This way, you can solve the problem of the Kenmore dryer not heating up.
Conclusion
If your Kenmore Dryer is not working and is not heating up properly, then you don’t need to get worried. By following some easy and simple steps, you can easily fix your Kenmore dryer without taking any professional help.
