Toilet flushing slow but not clogged. One of the most common problems people face regarding a toilet is flushing slowly, even if you cannot see any clogging. These toilets not flushing properly can be stressful as they make life miserable.
There can also be many other reasons causing the toilet to flush slowly. Problems in your toilet pipes that are connected to the toilet tanks can also cause the process of flushing to become slow. Along with this, there can be some other reasons too.
This issue needs to be resolved as soon as possible because this only causes trouble and annoyance for you.
Must Read: Why does my toilet bubbles when showering
Toilet flushing slow but not clogged
There can be many reasons your toilet tank is flushing slowly, even if it is not clogged. The following are why the toilet tank is flushing slowly even if it is not clogged.
Toilet wax ring is damaged
A toilet wax ring is an air seal between the sewer pipe and the toilet. If due, for any reason, this seal is damaged or broken, then this can also disturb the normal functioning of your flush, and this can cause your toilet to flush slowly.
If this toilet wax ring is damaged, you need to replace it with a new seal as soon as possible.
Solution to this problem
This problem can be solved by removing this old and damaged toilet wax ring and replacing it with a new one so that you can get rid of the situation in which your toilet is flushing slowly.
Partial blockage in the pipe
One of the common reasons that your toilet tank is not flushing properly and is very slow can be due to the partial blockage in your pipe.
Most of the time, some things get stuck inside the pipe, not in the tank. This causes the flush to become slow, and you may face some difficulty flushing.
But you don’t need to panic if you encounter such a situation because this can be easily solved with the help of a plunger.
Solution to this problem
This problem can be easily solved by using a plunger in the toilet. To do this:
- Take the plunger and push it back and forth.
- Move it down and up; while doing this, make sure that the plunger you are using has an air seal.
- Repeat this process two to three times unless you are sure that the blockage is removed; after this, try to flush your toilet and see if there is any difference or not.
Rust in the toilet
Another reason for the toilet flushing slow is due to rust. This rust can cause your toilet tank not to function properly.
This can cause inconvenience to you. To eliminate this problem, you must eliminate the rust causing the toilet to flush slowly.
Solution to this problem
To solve this issue, firstly, you need to turn off turn water, then flush out the water in the tank. Then the next step is to remove the bolts and nuts or even the screws holding the tank. After this:
- Remove the old seals and clear the area.
- Remove the rust from it.
- Put the new seals and nuts back once you finish the process.
In this way, you can get rid of the rust that is causing your toilet not to flush properly.
Sewer pipe is damaged
Another reason for your toilet flushing slow, even if it is not clogged, can be due to the damaged sewer pipe.
The sewer pipe is an important part of your toilet, and any kind of damage or fault in this sewer pipe can cause the toilet to flush slowly.
To get rid of this problem, you need to inspect what is wrong with your pipe to avoid such kind of problem caused by a damaged sewer pipe.
Solution to this problem
This issue can be easily resolved by yourself by repairing the sewer pipe of your toilet. For this, you need to locate the pipe first.
After this, check and inspect what is wrong with the sewer pipe and get it repaired. In this way, you can easily solve this problem.
Conclusion
If your toilet tank is causing trouble, and flushing slowly can be stressful. So, the best way to cope with it is to repair it as soon as possible. By following some simple steps above, you can easily get rid of such problems without needing professional help.
