Viking dishwasher wont start. Dishwashers are the appliance that is used by all household nowadays. This device has many benefits and functions.
If you are someone who doesn’t like to wash the dishes and if you want the dishes to be washed in a very less time, then you must consider using a dishwasher because using a dishwasher is the best way to get help and to get your work done in only a few minutes.
The dishwasher often doesn’t start even if you try to turn it on many times. But it cannot be turned on. You can easily turn on your Viking dishwasher by following some simple steps.
In this article, you will know all the steps one needs to follow to turn on your Viking dishwasher.
Viking dishwasher wont start
The following are the ways to turn on your Viking dishwasher that is not turning on.
Step 1: Turn off the electricity via circuit breaker
The first step while turning on a Viking dishwasher that is not turning on is to switch off the electricity via a circuit breaker.
This is the most important step as the dishwasher is an electrical appliance, and using the dishwasher with electricity can be fatal.
So you need to disconnect the electrical wiring of the dishwasher. You need to follow this step while repairing any appliance.
Step 2: Turn off the water supply
The next step is to turn off the water supply of the dishwasher. To do this, you must turn off the dishwasher water through the shut-off valve.
Also, disconnect the drain line. Once you have located it, detach the drain line.
Step 3: Remove the Screws
The next step is to unthread the screws of the dishwasher. Also, attach the copper tubing to the hot water shut-off valve inside the sink cabinet.
Make sure that the screws are removed properly. Reach to the latch base and then remove the screws from the dishwasher.
Step 4: Remove the wires from the latch
After this step, you need to remove the wires from the latch. Both the left and right sides have different pairs of wires.
So, remove the wires properly and very cautiously. Also, keep track of the wires.
Step 5: Install the new part
Now, inspect which part of the dishwasher is not working properly and install the new part in the dishwasher.
Step 6: Reassemble the dishwasher
The next step is to reassemble the dishwasher. For this, you need to put the screws back tightly. Also, put back the front and the control panel you had removed.
Make sure that all the screws are tight enough and not loose because this can lead to inconvenience.
Step 7: Secure the wiring
After this process, connect the dishwasher with the help of electricity and electrical connections and secure all the electrical wirings.
Also, perform all the electrical work carefully because dealing carelessly with the electrical appliances can be fatal.
Step 8: Connect the drain hose
Finally, connect the dishwasher drain hose with the water supply and as well as the garbage disposal.
Ensure you connect the drain hose and the drain line properly, as not connecting it properly can lead to leakage in your dishwasher and cause problems.
In this way, your new and replaced dishwasher is ready to use, and you can easily get your dishwasher installed yourself without taking help from any professional out there.
We can also say that the dishwasher is one of the most important products used in the kitchen by almost everyone in today’s world. It is also become the basic need of everyone because of its ability to perform so much work.
If you face any difficulty or if your Viking dishwasher is not starting, you need to get it repaired as soon as possible to prevent and get rid of any inconvenience. Now, following some simple steps, the dishwasher can be easily repaired and start working.