Washing machine wont start just clicks. When life is moving that fast, you must own those appliances that will ease you, and the washing machine is one of those.
A reliable washing machine is all you need, saving time and washing your clothes effortlessly. There are several machines like the automatic machines, which are much better than doing hand washing.
Depending on your budget and lifestyle, you can grab a washing machine of any style and size of your own choice.
If you are already using a washing machine and now it is making a clicking noise and isn’t starting, then do not worry; you’re in the right place at the right time.
Let me tell you why your washing machine is making that clicking noise and how you can fix it.
Washing Machine Wont Start Just Clicks
You must be worried that when you start your machine to rinse the clothes, you hear a strange clicking noise underneath, and your machine is not starting over even if you have to turn it on.
I’ll tell you why the problem is with the drain pump. There is something stuck in the water port of a drain pipe. It can be anything, be it a bobby pin, a coin, or any sharp solid thing.
How to fix it
A draining pump isn’t that difficult to find. It is on the front right side of the machine and held by four small crews.
Disconnect the power and remove the pump, open its lid and get that stuck bobby pin out of it. Close the pump cover, reconnect it and give the machine power. Your clicking problem must be resolved after this.
Causes Why Your Washing Machine Isn’t Staring
Having a washing machine in your home is a luxury item. Until your machine stops working, you can enjoy its favors like minimum time consumption, no hand laundry issues, and above all, protects your clothes.
We have listed common reasons why your washer is not starting and how you can fix that.
Power and Breaker
Your machine is not getting the power because it is not starting, so check the power because it can pull its power out of the wall because of its shaking.
The power plug is behind the machine, so do check that, or sometimes the plug is loose, and the machine stops midway because the plug the not connected to the power anymore. Another reason for not starting the machine can be a turnover breaker.
Lid Switch
Do check the lid switch, or you may call it a door switch. Washers lock their lids during running when you have a top load to do the washing safely.
There is a tab where the washer senses whether the door is locked or not; if it is not locked, the washer won’t start.
The washer gives you error signals if the lid switch is broken as it senses that it is not safe to start. Hence, look if the lid/door is locked or closed.
Demoralized washer motor
The broken motor can only be fixed by a professional but first, confirm if it is broken or not. You can ensure it by listening as it creates different sounds.
When you hear buss, whirr, and hum kind of sounds, your motor is broken. Replace the motor with a new one with the help of a professional.
Broken Knob
If your washing machine knob is broken, that can be the reason it’s not turning on. The knob can be cracked; you can replace it.
Do not worry; you can fix it with the help of epoxy glue. Hold the knop tight after applying the glue, and when it gets dry, shift the knob onto the shaft and test it by turning it by a wash cycle.
The shaft can also be broken; you can replace it with the new one.
Faulty Timer
One of the reasons for your washing machine not starting can be a faulty timer or a start switch. If the switch and the timer are broken or faulty, you can replace them by detaching the back plate to the upper control panel.
Shorted Main Control Board
You can call the control board the brain of your washing machine as it controls the washer and receives the wires from different components.
With new technology, the latest washers have the latest control board, unlike the previous old models of machines that have simple control boards.
If the control board is shorted, the washer won’t perform any response. It can be faulty as when it shows irregularity, that means it is faulty; the latest machines have control boards beyond the control pas on the front.
FAQs
How long should a washing machine last?
The average life span of a good washing machine is between 10 to 13 years.
Which is better, front or top load?
The front-load is better than the top as it consumes less power.
Conclusion
Surely your machine will start once you detect the cause of its not starting. We have mentioned various methods to fix your machine, yet still, if it is not helping you, you need to call a technician to get it fixed or replace your old washing machine with the new one.
Related Guides
