Usaveappliancescs Logo
Group of home appliances isolated on white background

Whirlpool fridge water dispenser not working

whirlpool fridge water dispenser not working

Whirlpool fridge water dispenser not working. Refrigerators with water dispensers are a great way to enjoy water and ice in a single place. You don’t put any bottles in refrigerators and refill them on every use.

Whirlpool brand is famous for its end products, especially refrigerators. A fridge with water dispensers provides both water and ice at a single button.

However, issues can occur which leave you empty glass. It’s frustrating. Isn’t it? If you own a whirlpool fridge and facing the same issue, you don’t have to worry. In this article, we’ll be looking at some common issues causing this problem and solutions.

Whirlpool fridge water dispenser not working

whirlpool fridge water dispenser issue

Water dispensers are undoubtfully an important part of a fridge. If it stops working suddenly, here are some quick checks. First of all, check whether there is water incoming in the fridge.

If it’s fine, you should check whether the buttons are stuck or not. Lastly, you should check whether the control lock is turned ON or NOT! Control lock locks all the control panel buttons.

If these aren’t occurring issues, check out other possible reasons along with the solution:

Low Water Pressure

The water inlet valve in the whirlpool refrigerator is responsible for incoming water which passes through it. This valve requires constant water pressure to work properly.

If your home has low water pressure or a thin pipe installed, or you have clogged pipes, you should call a professional to check the water pressure and act accordingly.

Control Panel Issue

whirlpool fridge water dispenser control panel

The control panel controls all of the functionality of the fridge water dispenser. Faulty controls can cause other buttons to stop working. When you press the controls, they will not work.

Inspect whether a single button is having an issue or all the buttons are not working. If there is an issue with a single button, Check for the dust built up inside the button and clean it. If it still doesn’t work, let the professional inspect it.

Frozen Water Pipes

Whirlpool fridge’s water pipes pass through the freezer. You’ll experience water blockage or low water incoming if water freeze in the lines.

If this happens, you should inspect the freezer’s temperature, less than 5 Fahrenheit.

Here are some steps to defrost water pipelines:

  1. Turn off the fridge.
  2. Remove the water dispenser pipelines.
  3. Take a bowl and boil water.
  4. Put pipelines in it and leave it for 10 minutes.
  5. Check if the pipeline is fully unclogged and put it back.

Faulty door switch

Faulty door switch

A door switch is placed in whirlpool refrigerators which detects whether the door is opened or not.

If the door is opened, the fridge water dispenser will automatically be turned OFF, and upon closing the door, the dispenser will automatically turn ON.

If your whirlpool fridge’s door switch is malfunctioning or broken, you should call a professional to replace the door switch.

Water Filter Is Clogged

The water filter is an essential component of the fridge’s dispenser. It filters hard water and chemical from the water. If not cleaned regularly, the water filter can get clogged and cause blockage.

To clean your dispenser’s filter, follow these steps:

  1. Locate the filter. It is usually present in the upper right-hand corner of the fridge.
  2. Lift the door and take out the filter.
  3. Take the warm water and put the filter in it.
  4. Keep it in warm water for 5 minutes.
  5. Now mix vinegar, dishwasher soap, and water.
  6. Put a filter in it and rub it gently with a soft brush.
  7. Rinse it back and forth for 2 minutes and take it out.
  8. Now take clean, warm water, submerge the filer in it, and take it out.
  9. Leave the filter to fresh air and let it dry.
  10. Now put it back in its place. Your water dispenser would be working fine currently!

FAQs

How often should you change the fridge’s filter?

It depends on the water quality in your area. In our opinion, it should be changed every six months of use. Moreover, you should clean it twice a month.

What is the reason behind frozen fridge pipes?

The fridge’s dispenser pipelines are located in the freezer. Frozen fridge pipelines are caused when you set the temperature to its maximum without having the freezer filled with items.

Conclusion

Refrigerators with water dispensers are a great way to save water, have cold water any time, or if you want ice cubes for soft drinks. A faulty dispenser isn’t an issue unless you know the solution. We have discussed several possible occurring reasons causing the dispenser to stop working. We hope you found this article helpful. Thank you for your time. Have a nice day!

Leave a Reply