Whirlpool washer stopped working mid cycle. One of the best washers out there is no doubt the Whirlpool washers. These Whirlpool washers are among its customers’ most useful and trusted appliances.
They are used by everyone nowadays as they offer maximum benefits. When it comes to washing, the Whirlpool washer is the first choice of almost everyone.
Due to unknown reasons, the Whirlpool washer stops the mid-cycle or has any other issue; there must be a technical problem.
In this situation, you don’t need to get panic as it can be easily repaired by yourself without taking any professional help.
In this article, you will learn how you can easily repair your Whirlpool washer that has stopped working mid-cycle.
After reading this article, you will be able to know about all the steps that one should consider while repairing the Whirlpool washer.
Whirlpool washer stopped working mid cycle
By following these simple and easy steps in this article, you will be able to repair your Whirlpool washer all by yourself without getting help from a professional.
You need to follow the following steps to repair your Whirlpool washer that has stopped mid-cycle.
Step 1: Unplug the washer
The first step in working with any electrical appliance is to unplug the washer.
When it comes to an electrical appliance, it is necessary first to unplug it and proceed with further work. This Whirlpool washer works with electricity, so the first thing is to unplug it.
Doing any work while electricity is on can be dangerous to you. Flip the circuit breaker to the washer and unplug it from all the power supplies.
After you are sure that all the electrical connections are removed, proceed further.
Step 2: Disassemble the washer
Now you have to disassemble your Whirlpool washer. You must remove the clips and disassemble your Whirlpool washer to do this.
To do this step, you need the help of a screwdriver, as it is difficult to do this without a screwdriver.
With the help of a screwdriver, you can easily loosen the clips in less time. Also, remove the clips that run down the door seal.
Now, in this way, you can easily access the front panel of the washer and remove it to do the next step.
Step 3: Disconnect the wirings of the washer
After removing the clips and the front panel then, the next step that you have to do is to disconnect or detach the wire connector from the gasket or the door seal.
Then also, remove all the wiring of the washer. Push the tab while removing the wire connector. In this way, the wire is detached.
After this, you need to remove the control panel of the washer. Do this process carefully and cautiously remove the control panel to access the inside of the machine.
Step 4: Remove the lid switch
The lid switch has a long knob that presses down the switch and goes into the washer. This lid switch has many functions.
If this lid switch is not working, it fails to send the signals, so the washer stops the mid-cycle. You need to remove the lid switch that is damaged or is not working properly.
Step 5: Install the lid switch
The next step is installing a new lid switch in the washer. Placing the brand new switch will help your washer work properly and won’t stop the mid-cycle.
Step 6: Reassemble the washer
Finally, the next step is to reassemble the washer. This is also the last step. Put the clips back in the washer and properly reassemble the washer.
Also, slide the front panel back into the washer. Ensure you put the control and front panel properly in the washer. To do this, you need some screws to put the front panel back and reassemble the dishwasher door.
So, In this way, you can easily repair your Whirlpool washer that stops the mid-cycle and is not functioning properly.
Can tripping of circuit breaker cause washer to stop mid-cycle?
Yes, the tripping of the circuit breaker can result in your Whirlpool washer stopping the mid-cycle. So, if you face any problems, check your electricity and voltage.
Also, inspect if your circuit breaker is working properly or if it is tripped or not.
To conclude, the Whirlpool washer is the basic need of today. It helps to perform your work in a very less time. It is very beneficial and used by every household. Now, using a washer at your home is very common as it is the best and most convenient way to lessen your work.