Maytag dishwasher not starting. Dishwashers are no doubt mostly used appliances in the kitchen. They have become necessary as dishwashers save you from cleaning dishes every day, wasting time and more water.
Convenience becomes an inconvenience when the appliance stops working. Well, we know how frustrating it can be. There is always hope, as there is a solution to every problem.
In this case, you don’t have to worry as always; we have come up with possible reasons why your Maytag dishwasher is not starting with the solutions.
Maytag Dishwasher Not Starting
Is your Maytag dishwasher not starting? It’s malfunctioning. So there are many reasons behind this issue discussed below:
Check the Main Supply
Before other possible reasons, make sure the power supply is plugged in. Sometimes, a loose connection is a reason behind most appliances not working.
Unplug the supply and check whether socket holder pins are loose or not. If pins are loose, open the socket and use nose plas to tighten the holes and screw it back.
Then, plug in the socket and test the dishwasher. If it’s still not working, move down to other issues discussed below.
Breaker Is tripped
One of the most common reasons behind your dishwasher not working is a tripped breaker. If none of the dishwasher lights are on and it seems completely shut down, you should check the breaker box. Probably, your kitchen’s breaker is shut off.
Why does this happen?
Many other kitchen appliances like coffee maker, stove, oven, etc., may run simultaneously with your dishwasher imposing too much load on the breaker, which causes it to trip.
The solution is simple. Don’t put too much load!
Ensure that the Door Is Closed
Most dishwashers have a built-in sensor that detects whether the dishwasher’s door is closed or not. If it isn’t properly sealed, the sensor will signal the control panel, and the dishwasher won’t turn on.
If that’s the matter, make sure you don’t overload the dishwasher. Also, check whether the door’s rubber is fine as they are supposed to be. If not, you have to replace your Maytag dishwasher’s door rubbers.
Blown Thermal Fuse
The thermal fuse is a kind of security measure. If your dishwasher is overheated upon continuous use or there is any short circuit in the wires, the thermal fuse sends signals to the control panel, which makes the panel unresponsive if you give any commands further.
So, to check the thermal fuse, follow these steps:
- First of all, remove the power supply.
- Open dishwasher front door. You’ll see some screws.
- Unscrew all of them and take the panel out.
- Cut the wires and replace the thermal fuse.
- Tighten the screws and test the dryer.
Control Lock is Enabled
The control lock is a safety measure specially designed to protect the machine from children. If you press any buttons from the control panel when the control lock is enabled, none of the buttons will work.
To check whether the control lock is enabled, see if the light is turned ON on the control panel. If so, press and hold the “LOCK” button for five seconds. This will disable the control lock, and the light will be turned off, and your machine will be back to normal.
How to reset the Maytag dishwasher?
It’s quite simple to reset the Maytag dishwasher. Unplug the dishwasher supply and wait for five minutes before plugging it again.
What is the average life of a Maytag dishwasher?
Reputed brands like Maytag are well known for their quality products. A Maytag dishwasher lasts about 10-12 years upon daily use. Daily maintenance increases the product’s life. Keep it clean and well maintained.
Where is the filter located in the Maytag dishwasher?
The filter is located at the bottom of the dishwasher. You have to unmount the dishwasher from the bottom to clean it thoroughly.
Here is the video guide to cleaning the Maytag dishwasher filter:
Maytag dishwasher not starting. Dishwashers are one of the daily used home necessities, and it has made the cleaning process hassle-free. It’s frustrating if it stops working. We hope our guide has helped you solve the problem with your Maytag dishwasher.